Root Explorer PHP

[ Root System Explorer ]

Editing: mgcmark.go

// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

// Garbage collector: marking and scanning

package runtime

import (
	"internal/abi"
	"internal/goarch"
	"internal/goexperiment"
	"runtime/internal/atomic"
	"runtime/internal/sys"
	"unsafe"
)

const (
	fixedRootFinalizers = iota
	fixedRootFreeGStacks
	fixedRootCount

// rootBlockBytes is the number of bytes to scan per data or
	// BSS root.
	rootBlockBytes = 256 << 10

// maxObletBytes is the maximum bytes of an object to scan at
	// once. Larger objects will be split up into "oblets" of at
	// most this size. Since we can scan 1–2 MB/ms, 128 KB bounds
	// scan preemption at ~100 µs.
	//
	// This must be > _MaxSmallSize so that the object base is the
	// span base.
	maxObletBytes = 128 << 10

// drainCheckThreshold specifies how many units of work to do
	// between self-preemption checks in gcDrain. Assuming a scan
	// rate of 1 MB/ms, this is ~100 µs. Lower values have higher
	// overhead in the scan loop (the scheduler check may perform
	// a syscall, so its overhead is nontrivial). Higher values
	// make the system less responsive to incoming work.
	drainCheckThreshold = 100000

// pagesPerSpanRoot indicates how many pages to scan from a span root
	// at a time. Used by special root marking.
	//
	// Higher values improve throughput by increasing locality, but
	// increase the minimum latency of a marking operation.
	//
	// Must be a multiple of the pageInUse bitmap element size and
	// must also evenly divide pagesPerArena.
	pagesPerSpanRoot = 512
)

// gcMarkRootPrepare queues root scanning jobs (stacks, globals, and
// some miscellany) and initializes scanning-related state.
//
// The world must be stopped.
func gcMarkRootPrepare() {
	assertWorldStopped()

// Compute how many data and BSS root blocks there are.
	nBlocks := func(bytes uintptr) int {
		return int(divRoundUp(bytes, rootBlockBytes))
	}

work.nDataRoots = 0
	work.nBSSRoots = 0

// Scan globals.
	for _, datap := range activeModules() {
		nDataRoots := nBlocks(datap.edata - datap.data)
		if nDataRoots > work.nDataRoots {
			work.nDataRoots = nDataRoots
		}
	}

for _, datap := range activeModules() {
		nBSSRoots := nBlocks(datap.ebss - datap.bss)
		if nBSSRoots > work.nBSSRoots {
			work.nBSSRoots = nBSSRoots
		}
	}

// Scan span roots for finalizer specials.
	//
	// We depend on addfinalizer to mark objects that get
	// finalizers after root marking.
	//
	// We're going to scan the whole heap (that was available at the time the
	// mark phase started, i.e. markArenas) for in-use spans which have specials.
	//
	// Break up the work into arenas, and further into chunks.
	//
	// Snapshot allArenas as markArenas. This snapshot is safe because allArenas
	// is append-only.
	mheap_.markArenas = mheap_.allArenas[:len(mheap_.allArenas):len(mheap_.allArenas)]
	work.nSpanRoots = len(mheap_.markArenas) * (pagesPerArena / pagesPerSpanRoot)

// Scan stacks.
	//
	// Gs may be created after this point, but it's okay that we
	// ignore them because they begin life without any roots, so
	// there's nothing to scan, and any roots they create during
	// the concurrent phase will be caught by the write barrier.
	work.stackRoots = allGsSnapshot()
	work.nStackRoots = len(work.stackRoots)

work.markrootNext = 0
	work.markrootJobs = uint32(fixedRootCount + work.nDataRoots + work.nBSSRoots + work.nSpanRoots + work.nStackRoots)

// Calculate base indexes of each root type
	work.baseData = uint32(fixedRootCount)
	work.baseBSS = work.baseData + uint32(work.nDataRoots)
	work.baseSpans = work.baseBSS + uint32(work.nBSSRoots)
	work.baseStacks = work.baseSpans + uint32(work.nSpanRoots)
	work.baseEnd = work.baseStacks + uint32(work.nStackRoots)
}

// gcMarkRootCheck checks that all roots have been scanned. It is
// purely for debugging.
func gcMarkRootCheck() {
	if work.markrootNext < work.markrootJobs {
		print(work.markrootNext, " of ", work.markrootJobs, " markroot jobs done\n")
		throw("left over markroot jobs")
	}

// Check that stacks have been scanned.
	//
	// We only check the first nStackRoots Gs that we should have scanned.
	// Since we don't care about newer Gs (see comment in
	// gcMarkRootPrepare), no locking is required.
	i := 0
	forEachGRace(func(gp *g) {
		if i >= work.nStackRoots {
			return
		}

if !gp.gcscandone {
			println("gp", gp, "goid", gp.goid,
				"status", readgstatus(gp),
				"gcscandone", gp.gcscandone)
			throw("scan missed a g")
		}

i++
	})
}

// ptrmask for an allocation containing a single pointer.
var oneptrmask = [...]uint8{1}

// markroot scans the i'th root.
//
// Preemption must be disabled (because this uses a gcWork).
//
// Returns the amount of GC work credit produced by the operation.
// If flushBgCredit is true, then that credit is also flushed
// to the background credit pool.
//
// nowritebarrier is only advisory here.
//
//go:nowritebarrier
func markroot(gcw *gcWork, i uint32, flushBgCredit bool) int64 {
	// Note: if you add a case here, please also update heapdump.go:dumproots.
	var workDone int64
	var workCounter *atomic.Int64
	switch {
	case work.baseData <= i && i < work.baseBSS:
		workCounter = &gcController.globalsScanWork
		for _, datap := range activeModules() {
			workDone += markrootBlock(datap.data, datap.edata-datap.data, datap.gcdatamask.bytedata, gcw, int(i-work.baseData))
		}

case work.baseBSS <= i && i < work.baseSpans:
		workCounter = &gcController.globalsScanWork
		for _, datap := range activeModules() {
			workDone += markrootBlock(datap.bss, datap.ebss-datap.bss, datap.gcbssmask.bytedata, gcw, int(i-work.baseBSS))
		}

case i == fixedRootFinalizers:
		for fb := allfin; fb != nil; fb = fb.alllink {
			cnt := uintptr(atomic.Load(&fb.cnt))
			scanblock(uintptr(unsafe.Pointer(&fb.fin[0])), cnt*unsafe.Sizeof(fb.fin[0]), &finptrmask[0], gcw, nil)
		}

case i == fixedRootFreeGStacks:
		// Switch to the system stack so we can call
		// stackfree.
		systemstack(markrootFreeGStacks)

case work.baseSpans <= i && i < work.baseStacks:
		// mark mspan.specials
		markrootSpans(gcw, int(i-work.baseSpans))

default:
		// the rest is scanning goroutine stacks
		workCounter = &gcController.stackScanWork
		if i < work.baseStacks || work.baseEnd <= i {
			printlock()
			print("runtime: markroot index ", i, " not in stack roots range [", work.baseStacks, ", ", work.baseEnd, ")\n")
			throw("markroot: bad index")
		}
		gp := work.stackRoots[i-work.baseStacks]

// remember when we've first observed the G blocked
		// needed only to output in traceback
		status := readgstatus(gp) // We are not in a scan state
		if (status == _Gwaiting || status == _Gsyscall) && gp.waitsince == 0 {
			gp.waitsince = work.tstart
		}

// scanstack must be done on the system stack in case
		// we're trying to scan our own stack.
		systemstack(func() {
			// If this is a self-scan, put the user G in
			// _Gwaiting to prevent self-deadlock. It may
			// already be in _Gwaiting if this is a mark
			// worker or we're in mark termination.
			userG := getg().m.curg
			selfScan := gp == userG && readgstatus(userG) == _Grunning
			if selfScan {
				casGToWaiting(userG, _Grunning, waitReasonGarbageCollectionScan)
			}

// TODO: suspendG blocks (and spins) until gp
			// stops, which may take a while for
			// running goroutines. Consider doing this in
			// two phases where the first is non-blocking:
			// we scan the stacks we can and ask running
			// goroutines to scan themselves; and the
			// second blocks.
			stopped := suspendG(gp)
			if stopped.dead {
				gp.gcscandone = true
				return
			}
			if gp.gcscandone {
				throw("g already scanned")
			}
			workDone += scanstack(gp, gcw)
			gp.gcscandone = true
			resumeG(stopped)

if selfScan {
				casgstatus(userG, _Gwaiting, _Grunning)
			}
		})
	}
	if workCounter != nil && workDone != 0 {
		workCounter.Add(workDone)
		if flushBgCredit {
			gcFlushBgCredit(workDone)
		}
	}
	return workDone
}

// markrootBlock scans the shard'th shard of the block of memory [b0,
// b0+n0), with the given pointer mask.
//
// Returns the amount of work done.
//
//go:nowritebarrier
func markrootBlock(b0, n0 uintptr, ptrmask0 *uint8, gcw *gcWork, shard int) int64 {
	if rootBlockBytes%(8*goarch.PtrSize) != 0 {
		// This is necessary to pick byte offsets in ptrmask0.
		throw("rootBlockBytes must be a multiple of 8*ptrSize")
	}

// Note that if b0 is toward the end of the address space,
	// then b0 + rootBlockBytes might wrap around.
	// These tests are written to avoid any possible overflow.
	off := uintptr(shard) * rootBlockBytes
	if off >= n0 {
		return 0
	}
	b := b0 + off
	ptrmask := (*uint8)(add(unsafe.Pointer(ptrmask0), uintptr(shard)*(rootBlockBytes/(8*goarch.PtrSize))))
	n := uintptr(rootBlockBytes)
	if off+n > n0 {
		n = n0 - off
	}

// Scan this shard.
	scanblock(b, n, ptrmask, gcw, nil)
	return int64(n)
}

// markrootFreeGStacks frees stacks of dead Gs.
//
// This does not free stacks of dead Gs cached on Ps, but having a few
// cached stacks around isn't a problem.
func markrootFreeGStacks() {
	// Take list of dead Gs with stacks.
	lock(&sched.gFree.lock)
	list := sched.gFree.stack
	sched.gFree.stack = gList{}
	unlock(&sched.gFree.lock)
	if list.empty() {
		return
	}

// Free stacks.
	q := gQueue{list.head, list.head}
	for gp := list.head.ptr(); gp != nil; gp = gp.schedlink.ptr() {
		stackfree(gp.stack)
		gp.stack.lo = 0
		gp.stack.hi = 0
		// Manipulate the queue directly since the Gs are
		// already all linked the right way.
		q.tail.set(gp)
	}

// Put Gs back on the free list.
	lock(&sched.gFree.lock)
	sched.gFree.noStack.pushAll(q)
	unlock(&sched.gFree.lock)
}

// markrootSpans marks roots for one shard of markArenas.
//
//go:nowritebarrier
func markrootSpans(gcw *gcWork, shard int) {
	// Objects with finalizers have two GC-related invariants:
	//
	// 1) Everything reachable from the object must be marked.
	// This ensures that when we pass the object to its finalizer,
	// everything the finalizer can reach will be retained.
	//
	// 2) Finalizer specials (which are not in the garbage
	// collected heap) are roots. In practice, this means the fn
	// field must be scanned.
	sg := mheap_.sweepgen

// Find the arena and page index into that arena for this shard.
	ai := mheap_.markArenas[shard/(pagesPerArena/pagesPerSpanRoot)]
	ha := mheap_.arenas[ai.l1()][ai.l2()]
	arenaPage := uint(uintptr(shard) * pagesPerSpanRoot % pagesPerArena)

// Construct slice of bitmap which we'll iterate over.
	specialsbits := ha.pageSpecials[arenaPage/8:]
	specialsbits = specialsbits[:pagesPerSpanRoot/8]
	for i := range specialsbits {
		// Find set bits, which correspond to spans with specials.
		specials := atomic.Load8(&specialsbits[i])
		if specials == 0 {
			continue
		}
		for j := uint(0); j < 8; j++ {
			if specials&(1<<j) == 0 {
				continue
			}
			// Find the span for this bit.
			//
			// This value is guaranteed to be non-nil because having
			// specials implies that the span is in-use, and since we're
			// currently marking we can be sure that we don't have to worry
			// about the span being freed and re-used.
			s := ha.spans[arenaPage+uint(i)*8+j]

// The state must be mSpanInUse if the specials bit is set, so
			// sanity check that.
			if state := s.state.get(); state != mSpanInUse {
				print("s.state = ", state, "\n")
				throw("non in-use span found with specials bit set")
			}
			// Check that this span was swept (it may be cached or uncached).
			if !useCheckmark && !(s.sweepgen == sg || s.sweepgen == sg+3) {
				// sweepgen was updated (+2) during non-checkmark GC pass
				print("sweep ", s.sweepgen, " ", sg, "\n")
				throw("gc: unswept span")
			}

// Lock the specials to prevent a special from being
			// removed from the list while we're traversing it.
			lock(&s.speciallock)
			for sp := s.specials; sp != nil; sp = sp.next {
				if sp.kind != _KindSpecialFinalizer {
					continue
				}
				// don't mark finalized object, but scan it so we
				// retain everything it points to.
				spf := (*specialfinalizer)(unsafe.Pointer(sp))
				// A finalizer can be set for an inner byte of an object, find object beginning.
				p := s.base() + uintptr(spf.special.offset)/s.elemsize*s.elemsize

// Mark everything that can be reached from
				// the object (but *not* the object itself or
				// we'll never collect it).
				if !s.spanclass.noscan() {
					scanobject(p, gcw)
				}

// The special itself is a root.
				scanblock(uintptr(unsafe.Pointer(&spf.fn)), goarch.PtrSize, &oneptrmask[0], gcw, nil)
			}
			unlock(&s.speciallock)
		}
	}
}

// gcAssistAlloc performs GC work to make gp's assist debt positive.
// gp must be the calling user goroutine.
//
// This must be called with preemption enabled.
func gcAssistAlloc(gp *g) {
	// Don't assist in non-preemptible contexts. These are
	// generally fragile and won't allow the assist to block.
	if getg() == gp.m.g0 {
		return
	}
	if mp := getg().m; mp.locks > 0 || mp.preemptoff != "" {
		return
	}

// This extremely verbose boolean indicates whether we've
	// entered mark assist from the perspective of the tracer.
	//
	// In the old tracer, this is just before we call gcAssistAlloc1
	// *and* tracing is enabled. Because the old tracer doesn't
	// do any extra tracking, we need to be careful to not emit an
	// "end" event if there was no corresponding "begin" for the
	// mark assist.
	//
	// In the new tracer, this is just before we call gcAssistAlloc1
	// *regardless* of whether tracing is enabled. This is because
	// the new tracer allows for tracing to begin (and advance
	// generations) in the middle of a GC mark phase, so we need to
	// record some state so that the tracer can pick it up to ensure
	// a consistent trace result.
	//
	// TODO(mknyszek): Hide the details of inMarkAssist in tracer
	// functions and simplify all the state tracking. This is a lot.
	enteredMarkAssistForTracing := false
retry:
	if gcCPULimiter.limiting() {
		// If the CPU limiter is enabled, intentionally don't
		// assist to reduce the amount of CPU time spent in the GC.
		if enteredMarkAssistForTracing {
			trace := traceAcquire()
			if trace.ok() {
				trace.GCMarkAssistDone()
				// Set this *after* we trace the end to make sure
				// that we emit an in-progress event if this is
				// the first event for the goroutine in the trace
				// or trace generation. Also, do this between
				// acquire/release because this is part of the
				// goroutine's trace state, and it must be atomic
				// with respect to the tracer.
				gp.inMarkAssist = false
				traceRelease(trace)
			} else {
				// This state is tracked even if tracing isn't enabled.
				// It's only used by the new tracer.
				// See the comment on enteredMarkAssistForTracing.
				gp.inMarkAssist = false
			}
		}
		return
	}
	// Compute the amount of scan work we need to do to make the
	// balance positive. When the required amount of work is low,
	// we over-assist to build up credit for future allocations
	// and amortize the cost of assisting.
	assistWorkPerByte := gcController.assistWorkPerByte.Load()
	assistBytesPerWork := gcController.assistBytesPerWork.Load()
	debtBytes := -gp.gcAssistBytes
	scanWork := int64(assistWorkPerByte * float64(debtBytes))
	if scanWork < gcOverAssistWork {
		scanWork = gcOverAssistWork
		debtBytes = int64(assistBytesPerWork * float64(scanWork))
	}

// Steal as much credit as we can from the background GC's
	// scan credit. This is racy and may drop the background
	// credit below 0 if two mutators steal at the same time. This
	// will just cause steals to fail until credit is accumulated
	// again, so in the long run it doesn't really matter, but we
	// do have to handle the negative credit case.
	bgScanCredit := gcController.bgScanCredit.Load()
	stolen := int64(0)
	if bgScanCredit > 0 {
		if bgScanCredit < scanWork {
			stolen = bgScanCredit
			gp.gcAssistBytes += 1 + int64(assistBytesPerWork*float64(stolen))
		} else {
			stolen = scanWork
			gp.gcAssistBytes += debtBytes
		}
		gcController.bgScanCredit.Add(-stolen)

scanWork -= stolen

if scanWork == 0 {
			// We were able to steal all of the credit we
			// needed.
			if enteredMarkAssistForTracing {
				trace := traceAcquire()
				if trace.ok() {
					trace.GCMarkAssistDone()
					// Set this *after* we trace the end to make sure
					// that we emit an in-progress event if this is
					// the first event for the goroutine in the trace
					// or trace generation. Also, do this between
					// acquire/release because this is part of the
					// goroutine's trace state, and it must be atomic
					// with respect to the tracer.
					gp.inMarkAssist = false
					traceRelease(trace)
				} else {
					// This state is tracked even if tracing isn't enabled.
					// It's only used by the new tracer.
					// See the comment on enteredMarkAssistForTracing.
					gp.inMarkAssist = false
				}
			}
			return
		}
	}
	if !enteredMarkAssistForTracing {
		trace := traceAcquire()
		if trace.ok() {
			if !goexperiment.ExecTracer2 {
				// In the old tracer, enter mark assist tracing only
				// if we actually traced an event. Otherwise a goroutine
				// waking up from mark assist post-GC might end up
				// writing a stray "end" event.
				//
				// This means inMarkAssist will not be meaningful
				// in the old tracer; that's OK, it's unused.
				//
				// See the comment on enteredMarkAssistForTracing.
				enteredMarkAssistForTracing = true
			}
			trace.GCMarkAssistStart()
			// Set this *after* we trace the start, otherwise we may
			// emit an in-progress event for an assist we're about to start.
			gp.inMarkAssist = true
			traceRelease(trace)
		} else {
			gp.inMarkAssist = true
		}
		if goexperiment.ExecTracer2 {
			// In the new tracer, set enter mark assist tracing if we
			// ever pass this point, because we must manage inMarkAssist
			// correctly.
			//
			// See the comment on enteredMarkAssistForTracing.
			enteredMarkAssistForTracing = true
		}
	}

// Perform assist work
	systemstack(func() {
		gcAssistAlloc1(gp, scanWork)
		// The user stack may have moved, so this can't touch
		// anything on it until it returns from systemstack.
	})

completed := gp.param != nil
	gp.param = nil
	if completed {
		gcMarkDone()
	}

if gp.gcAssistBytes < 0 {
		// We were unable steal enough credit or perform
		// enough work to pay off the assist debt. We need to
		// do one of these before letting the mutator allocate
		// more to prevent over-allocation.
		//
		// If this is because we were preempted, reschedule
		// and try some more.
		if gp.preempt {
			Gosched()
			goto retry
		}

// Add this G to an assist queue and park. When the GC
		// has more background credit, it will satisfy queued
		// assists before flushing to the global credit pool.
		//
		// Note that this does *not* get woken up when more
		// work is added to the work list. The theory is that
		// there wasn't enough work to do anyway, so we might
		// as well let background marking take care of the
		// work that is available.
		if !gcParkAssist() {
			goto retry
		}

// At this point either background GC has satisfied
		// this G's assist debt, or the GC cycle is over.
	}
	if enteredMarkAssistForTracing {
		trace := traceAcquire()
		if trace.ok() {
			trace.GCMarkAssistDone()
			// Set this *after* we trace the end to make sure
			// that we emit an in-progress event if this is
			// the first event for the goroutine in the trace
			// or trace generation. Also, do this between
			// acquire/release because this is part of the
			// goroutine's trace state, and it must be atomic
			// with respect to the tracer.
			gp.inMarkAssist = false
			traceRelease(trace)
		} else {
			// This state is tracked even if tracing isn't enabled.
			// It's only used by the new tracer.
			// See the comment on enteredMarkAssistForTracing.
			gp.inMarkAssist = false
		}
	}
}

// gcAssistAlloc1 is the part of gcAssistAlloc that runs on the system
// stack. This is a separate function to make it easier to see that
// we're not capturing anything from the user stack, since the user
// stack may move while we're in this function.
//
// gcAssistAlloc1 indicates whether this assist completed the mark
// phase by setting gp.param to non-nil. This can't be communicated on
// the stack since it may move.
//
//go:systemstack
func gcAssistAlloc1(gp *g, scanWork int64) {
	// Clear the flag indicating that this assist completed the
	// mark phase.
	gp.param = nil

if atomic.Load(&gcBlackenEnabled) == 0 {
		// The gcBlackenEnabled check in malloc races with the
		// store that clears it but an atomic check in every malloc
		// would be a performance hit.
		// Instead we recheck it here on the non-preemptible system
		// stack to determine if we should perform an assist.

// GC is done, so ignore any remaining debt.
		gp.gcAssistBytes = 0
		return
	}
	// Track time spent in this assist. Since we're on the
	// system stack, this is non-preemptible, so we can
	// just measure start and end time.
	//
	// Limiter event tracking might be disabled if we end up here
	// while on a mark worker.
	startTime := nanotime()
	trackLimiterEvent := gp.m.p.ptr().limiterEvent.start(limiterEventMarkAssist, startTime)

decnwait := atomic.Xadd(&work.nwait, -1)
	if decnwait == work.nproc {
		println("runtime: work.nwait =", decnwait, "work.nproc=", work.nproc)
		throw("nwait > work.nprocs")
	}

// gcDrainN requires the caller to be preemptible.
	casGToWaiting(gp, _Grunning, waitReasonGCAssistMarking)

// drain own cached work first in the hopes that it
	// will be more cache friendly.
	gcw := &getg().m.p.ptr().gcw
	workDone := gcDrainN(gcw, scanWork)

casgstatus(gp, _Gwaiting, _Grunning)

// Record that we did this much scan work.
	//
	// Back out the number of bytes of assist credit that
	// this scan work counts for. The "1+" is a poor man's
	// round-up, to ensure this adds credit even if
	// assistBytesPerWork is very low.
	assistBytesPerWork := gcController.assistBytesPerWork.Load()
	gp.gcAssistBytes += 1 + int64(assistBytesPerWork*float64(workDone))

// If this is the last worker and we ran out of work,
	// signal a completion point.
	incnwait := atomic.Xadd(&work.nwait, +1)
	if incnwait > work.nproc {
		println("runtime: work.nwait=", incnwait,
			"work.nproc=", work.nproc)
		throw("work.nwait > work.nproc")
	}

if incnwait == work.nproc && !gcMarkWorkAvailable(nil) {
		// This has reached a background completion point. Set
		// gp.param to a non-nil value to indicate this. It
		// doesn't matter what we set it to (it just has to be
		// a valid pointer).
		gp.param = unsafe.Pointer(gp)
	}
	now := nanotime()
	duration := now - startTime
	pp := gp.m.p.ptr()
	pp.gcAssistTime += duration
	if trackLimiterEvent {
		pp.limiterEvent.stop(limiterEventMarkAssist, now)
	}
	if pp.gcAssistTime > gcAssistTimeSlack {
		gcController.assistTime.Add(pp.gcAssistTime)
		gcCPULimiter.update(now)
		pp.gcAssistTime = 0
	}
}

// gcWakeAllAssists wakes all currently blocked assists. This is used
// at the end of a GC cycle. gcBlackenEnabled must be false to prevent
// new assists from going to sleep after this point.
func gcWakeAllAssists() {
	lock(&work.assistQueue.lock)
	list := work.assistQueue.q.popList()
	injectglist(&list)
	unlock(&work.assistQueue.lock)
}

// gcParkAssist puts the current goroutine on the assist queue and parks.
//
// gcParkAssist reports whether the assist is now satisfied. If it
// returns false, the caller must retry the assist.
func gcParkAssist() bool {
	lock(&work.assistQueue.lock)
	// If the GC cycle finished while we were getting the lock,
	// exit the assist. The cycle can't finish while we hold the
	// lock.
	if atomic.Load(&gcBlackenEnabled) == 0 {
		unlock(&work.assistQueue.lock)
		return true
	}

gp := getg()
	oldList := work.assistQueue.q
	work.assistQueue.q.pushBack(gp)

// Recheck for background credit now that this G is in
	// the queue, but can still back out. This avoids a
	// race in case background marking has flushed more
	// credit since we checked above.
	if gcController.bgScanCredit.Load() > 0 {
		work.assistQueue.q = oldList
		if oldList.tail != 0 {
			oldList.tail.ptr().schedlink.set(nil)
		}
		unlock(&work.assistQueue.lock)
		return false
	}
	// Park.
	goparkunlock(&work.assistQueue.lock, waitReasonGCAssistWait, traceBlockGCMarkAssist, 2)
	return true
}

// gcFlushBgCredit flushes scanWork units of background scan work
// credit. This first satisfies blocked assists on the
// work.assistQueue and then flushes any remaining credit to
// gcController.bgScanCredit.
//
// Write barriers are disallowed because this is used by gcDrain after
// it has ensured that all work is drained and this must preserve that
// condition.
//
//go:nowritebarrierrec
func gcFlushBgCredit(scanWork int64) {
	if work.assistQueue.q.empty() {
		// Fast path; there are no blocked assists. There's a
		// small window here where an assist may add itself to
		// the blocked queue and park. If that happens, we'll
		// just get it on the next flush.
		gcController.bgScanCredit.Add(scanWork)
		return
	}

assistBytesPerWork := gcController.assistBytesPerWork.Load()
	scanBytes := int64(float64(scanWork) * assistBytesPerWork)

lock(&work.assistQueue.lock)
	for !work.assistQueue.q.empty() && scanBytes > 0 {
		gp := work.assistQueue.q.pop()
		// Note that gp.gcAssistBytes is negative because gp
		// is in debt. Think carefully about the signs below.
		if scanBytes+gp.gcAssistBytes >= 0 {
			// Satisfy this entire assist debt.
			scanBytes += gp.gcAssistBytes
			gp.gcAssistBytes = 0
			// It's important that we *not* put gp in
			// runnext. Otherwise, it's possible for user
			// code to exploit the GC worker's high
			// scheduler priority to get itself always run
			// before other goroutines and always in the
			// fresh quantum started by GC.
			ready(gp, 0, false)
		} else {
			// Partially satisfy this assist.
			gp.gcAssistBytes += scanBytes
			scanBytes = 0
			// As a heuristic, we move this assist to the
			// back of the queue so that large assists
			// can't clog up the assist queue and
			// substantially delay small assists.
			work.assistQueue.q.pushBack(gp)
			break
		}
	}

if scanBytes > 0 {
		// Convert from scan bytes back to work.
		assistWorkPerByte := gcController.assistWorkPerByte.Load()
		scanWork = int64(float64(scanBytes) * assistWorkPerByte)
		gcController.bgScanCredit.Add(scanWork)
	}
	unlock(&work.assistQueue.lock)
}

// scanstack scans gp's stack, greying all pointers found on the stack.
//
// Returns the amount of scan work performed, but doesn't update
// gcController.stackScanWork or flush any credit. Any background credit produced
// by this function should be flushed by its caller. scanstack itself can't
// safely flush because it may result in trying to wake up a goroutine that
// was just scanned, resulting in a self-deadlock.
//
// scanstack will also shrink the stack if it is safe to do so. If it
// is not, it schedules a stack shrink for the next synchronous safe
// point.
//
// scanstack is marked go:systemstack because it must not be preempted
// while using a workbuf.
//
//go:nowritebarrier
//go:systemstack
func scanstack(gp *g, gcw *gcWork) int64 {
	if readgstatus(gp)&_Gscan == 0 {
		print("runtime:scanstack: gp=", gp, ", goid=", gp.goid, ", gp->atomicstatus=", hex(readgstatus(gp)), "\n")
		throw("scanstack - bad status")
	}

switch readgstatus(gp) &^ _Gscan {
	default:
		print("runtime: gp=", gp, ", goid=", gp.goid, ", gp->atomicstatus=", readgstatus(gp), "\n")
		throw("mark - bad status")
	case _Gdead:
		return 0
	case _Grunning:
		print("runtime: gp=", gp, ", goid=", gp.goid, ", gp->atomicstatus=", readgstatus(gp), "\n")
		throw("scanstack: goroutine not stopped")
	case _Grunnable, _Gsyscall, _Gwaiting:
		// ok
	}

if gp == getg() {
		throw("can't scan our own stack")
	}

// scannedSize is the amount of work we'll be reporting.
	//
	// It is less than the allocated size (which is hi-lo).
	var sp uintptr
	if gp.syscallsp != 0 {
		sp = gp.syscallsp // If in a system call this is the stack pointer (gp.sched.sp can be 0 in this case on Windows).
	} else {
		sp = gp.sched.sp
	}
	scannedSize := gp.stack.hi - sp

// Keep statistics for initial stack size calculation.
	// Note that this accumulates the scanned size, not the allocated size.
	p := getg().m.p.ptr()
	p.scannedStackSize += uint64(scannedSize)
	p.scannedStacks++

if isShrinkStackSafe(gp) {
		// Shrink the stack if not much of it is being used.
		shrinkstack(gp)
	} else {
		// Otherwise, shrink the stack at the next sync safe point.
		gp.preemptShrink = true
	}

var state stackScanState
	state.stack = gp.stack

if stackTraceDebug {
		println("stack trace goroutine", gp.goid)
	}

if debugScanConservative && gp.asyncSafePoint {
		print("scanning async preempted goroutine ", gp.goid, " stack [", hex(gp.stack.lo), ",", hex(gp.stack.hi), ")\n")
	}

// Scan the saved context register. This is effectively a live
	// register that gets moved back and forth between the
	// register and sched.ctxt without a write barrier.
	if gp.sched.ctxt != nil {
		scanblock(uintptr(unsafe.Pointer(&gp.sched.ctxt)), goarch.PtrSize, &oneptrmask[0], gcw, &state)
	}

// Scan the stack. Accumulate a list of stack objects.
	var u unwinder
	for u.init(gp, 0); u.valid(); u.next() {
		scanframeworker(&u.frame, &state, gcw)
	}

// Find additional pointers that point into the stack from the heap.
	// Currently this includes defers and panics. See also function copystack.

// Find and trace other pointers in defer records.
	for d := gp._defer; d != nil; d = d.link {
		if d.fn != nil {
			// Scan the func value, which could be a stack allocated closure.
			// See issue 30453.
			scanblock(uintptr(unsafe.Pointer(&d.fn)), goarch.PtrSize, &oneptrmask[0], gcw, &state)
		}
		if d.link != nil {
			// The link field of a stack-allocated defer record might point
			// to a heap-allocated defer record. Keep that heap record live.
			scanblock(uintptr(unsafe.Pointer(&d.link)), goarch.PtrSize, &oneptrmask[0], gcw, &state)
		}
		// Retain defers records themselves.
		// Defer records might not be reachable from the G through regular heap
		// tracing because the defer linked list might weave between the stack and the heap.
		if d.heap {
			scanblock(uintptr(unsafe.Pointer(&d)), goarch.PtrSize, &oneptrmask[0], gcw, &state)
		}
	}
	if gp._panic != nil {
		// Panics are always stack allocated.
		state.putPtr(uintptr(unsafe.Pointer(gp._panic)), false)
	}

// Find and scan all reachable stack objects.
	//
	// The state's pointer queue prioritizes precise pointers over
	// conservative pointers so that we'll prefer scanning stack
	// objects precisely.
	state.buildIndex()
	for {
		p, conservative := state.getPtr()
		if p == 0 {
			break
		}
		obj := state.findObject(p)
		if obj == nil {
			continue
		}
		r := obj.r
		if r == nil {
			// We've already scanned this object.
			continue
		}
		obj.setRecord(nil) // Don't scan it again.
		if stackTraceDebug {
			printlock()
			print("  live stkobj at", hex(state.stack.lo+uintptr(obj.off)), "of size", obj.size)
			if conservative {
				print(" (conservative)")
			}
			println()
			printunlock()
		}
		gcdata := r.gcdata()
		var s *mspan
		if r.useGCProg() {
			// This path is pretty unlikely, an object large enough
			// to have a GC program allocated on the stack.
			// We need some space to unpack the program into a straight
			// bitmask, which we allocate/free here.
			// TODO: it would be nice if there were a way to run a GC
			// program without having to store all its bits. We'd have
			// to change from a Lempel-Ziv style program to something else.
			// Or we can forbid putting objects on stacks if they require
			// a gc program (see issue 27447).
			s = materializeGCProg(r.ptrdata(), gcdata)
			gcdata = (*byte)(unsafe.Pointer(s.startAddr))
		}

b := state.stack.lo + uintptr(obj.off)
		if conservative {
			scanConservative(b, r.ptrdata(), gcdata, gcw, &state)
		} else {
			scanblock(b, r.ptrdata(), gcdata, gcw, &state)
		}

if s != nil {
			dematerializeGCProg(s)
		}
	}

// Deallocate object buffers.
	// (Pointer buffers were all deallocated in the loop above.)
	for state.head != nil {
		x := state.head
		state.head = x.next
		if stackTraceDebug {
			for i := 0; i < x.nobj; i++ {
				obj := &x.obj[i]
				if obj.r == nil { // reachable
					continue
				}
				println("  dead stkobj at", hex(gp.stack.lo+uintptr(obj.off)), "of size", obj.r.size)
				// Note: not necessarily really dead - only reachable-from-ptr dead.
			}
		}
		x.nobj = 0
		putempty((*workbuf)(unsafe.Pointer(x)))
	}
	if state.buf != nil || state.cbuf != nil || state.freeBuf != nil {
		throw("remaining pointer buffers")
	}
	return int64(scannedSize)
}

// Scan a stack frame: local variables and function arguments/results.
//
//go:nowritebarrier
func scanframeworker(frame *stkframe, state *stackScanState, gcw *gcWork) {
	if _DebugGC > 1 && frame.continpc != 0 {
		print("scanframe ", funcname(frame.fn), "\n")
	}

isAsyncPreempt := frame.fn.valid() && frame.fn.funcID == abi.FuncID_asyncPreempt
	isDebugCall := frame.fn.valid() && frame.fn.funcID == abi.FuncID_debugCallV2
	if state.conservative || isAsyncPreempt || isDebugCall {
		if debugScanConservative {
			println("conservatively scanning function", funcname(frame.fn), "at PC", hex(frame.continpc))
		}

// Conservatively scan the frame. Unlike the precise
		// case, this includes the outgoing argument space
		// since we may have stopped while this function was
		// setting up a call.
		//
		// TODO: We could narrow this down if the compiler
		// produced a single map per function of stack slots
		// and registers that ever contain a pointer.
		if frame.varp != 0 {
			size := frame.varp - frame.sp
			if size > 0 {
				scanConservative(frame.sp, size, nil, gcw, state)
			}
		}

// Scan arguments to this frame.
		if n := frame.argBytes(); n != 0 {
			// TODO: We could pass the entry argument map
			// to narrow this down further.
			scanConservative(frame.argp, n, nil, gcw, state)
		}

if isAsyncPreempt || isDebugCall {
			// This function's frame contained the
			// registers for the asynchronously stopped
			// parent frame. Scan the parent
			// conservatively.
			state.conservative = true
		} else {
			// We only wanted to scan those two frames
			// conservatively. Clear the flag for future
			// frames.
			state.conservative = false
		}
		return
	}

locals, args, objs := frame.getStackMap(false)

// Scan local variables if stack frame has been allocated.
	if locals.n > 0 {
		size := uintptr(locals.n) * goarch.PtrSize
		scanblock(frame.varp-size, size, locals.bytedata, gcw, state)
	}

// Scan arguments.
	if args.n > 0 {
		scanblock(frame.argp, uintptr(args.n)*goarch.PtrSize, args.bytedata, gcw, state)
	}

// Add all stack objects to the stack object list.
	if frame.varp != 0 {
		// varp is 0 for defers, where there are no locals.
		// In that case, there can't be a pointer to its args, either.
		// (And all args would be scanned above anyway.)
		for i := range objs {
			obj := &objs[i]
			off := obj.off
			base := frame.varp // locals base pointer
			if off >= 0 {
				base = frame.argp // arguments and return values base pointer
			}
			ptr := base + uintptr(off)
			if ptr < frame.sp {
				// object hasn't been allocated in the frame yet.
				continue
			}
			if stackTraceDebug {
				println("stkobj at", hex(ptr), "of size", obj.size)
			}
			state.addObject(ptr, obj)
		}
	}
}

type gcDrainFlags int

const (
	gcDrainUntilPreempt gcDrainFlags = 1 << iota
	gcDrainFlushBgCredit
	gcDrainIdle
	gcDrainFractional
)

// gcDrainMarkWorkerIdle is a wrapper for gcDrain that exists to better account
// mark time in profiles.
func gcDrainMarkWorkerIdle(gcw *gcWork) {
	gcDrain(gcw, gcDrainIdle|gcDrainUntilPreempt|gcDrainFlushBgCredit)
}

// gcDrainMarkWorkerDedicated is a wrapper for gcDrain that exists to better account
// mark time in profiles.
func gcDrainMarkWorkerDedicated(gcw *gcWork, untilPreempt bool) {
	flags := gcDrainFlushBgCredit
	if untilPreempt {
		flags |= gcDrainUntilPreempt
	}
	gcDrain(gcw, flags)
}

// gcDrainMarkWorkerFractional is a wrapper for gcDrain that exists to better account
// mark time in profiles.
func gcDrainMarkWorkerFractional(gcw *gcWork) {
	gcDrain(gcw, gcDrainFractional|gcDrainUntilPreempt|gcDrainFlushBgCredit)
}

// gcDrain scans roots and objects in work buffers, blackening grey
// objects until it is unable to get more work. It may return before
// GC is done; it's the caller's responsibility to balance work from
// other Ps.
//
// If flags&gcDrainUntilPreempt != 0, gcDrain returns when g.preempt
// is set.
//
// If flags&gcDrainIdle != 0, gcDrain returns when there is other work
// to do.
//
// If flags&gcDrainFractional != 0, gcDrain self-preempts when
// pollFractionalWorkerExit() returns true. This implies
// gcDrainNoBlock.
//
// If flags&gcDrainFlushBgCredit != 0, gcDrain flushes scan work
// credit to gcController.bgScanCredit every gcCreditSlack units of
// scan work.
//
// gcDrain will always return if there is a pending STW or forEachP.
//
// Disabling write barriers is necessary to ensure that after we've
// confirmed that we've drained gcw, that we don't accidentally end
// up flipping that condition by immediately adding work in the form
// of a write barrier buffer flush.
//
// Don't set nowritebarrierrec because it's safe for some callees to
// have write barriers enabled.
//
//go:nowritebarrier
func gcDrain(gcw *gcWork, flags gcDrainFlags) {
	if !writeBarrier.enabled {
		throw("gcDrain phase incorrect")
	}

// N.B. We must be running in a non-preemptible context, so it's
	// safe to hold a reference to our P here.
	gp := getg().m.curg
	pp := gp.m.p.ptr()
	preemptible := flags&gcDrainUntilPreempt != 0
	flushBgCredit := flags&gcDrainFlushBgCredit != 0
	idle := flags&gcDrainIdle != 0

initScanWork := gcw.heapScanWork

// checkWork is the scan work before performing the next
	// self-preempt check.
	checkWork := int64(1<<63 - 1)
	var check func() bool
	if flags&(gcDrainIdle|gcDrainFractional) != 0 {
		checkWork = initScanWork + drainCheckThreshold
		if idle {
			check = pollWork
		} else if flags&gcDrainFractional != 0 {
			check = pollFractionalWorkerExit
		}
	}

// Drain root marking jobs.
	if work.markrootNext < work.markrootJobs {
		// Stop if we're preemptible, if someone wants to STW, or if
		// someone is calling forEachP.
		for !(gp.preempt && (preemptible || sched.gcwaiting.Load() || pp.runSafePointFn != 0)) {
			job := atomic.Xadd(&work.markrootNext, +1) - 1
			if job >= work.markrootJobs {
				break
			}
			markroot(gcw, job, flushBgCredit)
			if check != nil && check() {
				goto done
			}
		}
	}

// Drain heap marking jobs.
	//
	// Stop if we're preemptible, if someone wants to STW, or if
	// someone is calling forEachP.
	//
	// TODO(mknyszek): Consider always checking gp.preempt instead
	// of having the preempt flag, and making an exception for certain
	// mark workers in retake. That might be simpler than trying to
	// enumerate all the reasons why we might want to preempt, even
	// if we're supposed to be mostly non-preemptible.
	for !(gp.preempt && (preemptible || sched.gcwaiting.Load() || pp.runSafePointFn != 0)) {
		// Try to keep work available on the global queue. We used to
		// check if there were waiting workers, but it's better to
		// just keep work available than to make workers wait. In the
		// worst case, we'll do O(log(_WorkbufSize)) unnecessary
		// balances.
		if work.full == 0 {
			gcw.balance()
		}

b := gcw.tryGetFast()
		if b == 0 {
			b = gcw.tryGet()
			if b == 0 {
				// Flush the write barrier
				// buffer; this may create
				// more work.
				wbBufFlush()
				b = gcw.tryGet()
			}
		}
		if b == 0 {
			// Unable to get work.
			break
		}
		scanobject(b, gcw)

// Flush background scan work credit to the global
		// account if we've accumulated enough locally so
		// mutator assists can draw on it.
		if gcw.heapScanWork >= gcCreditSlack {
			gcController.heapScanWork.Add(gcw.heapScanWork)
			if flushBgCredit {
				gcFlushBgCredit(gcw.heapScanWork - initScanWork)
				initScanWork = 0
			}
			checkWork -= gcw.heapScanWork
			gcw.heapScanWork = 0

if checkWork <= 0 {
				checkWork += drainCheckThreshold
				if check != nil && check() {
					break
				}
			}
		}
	}

done:
	// Flush remaining scan work credit.
	if gcw.heapScanWork > 0 {
		gcController.heapScanWork.Add(gcw.heapScanWork)
		if flushBgCredit {
			gcFlushBgCredit(gcw.heapScanWork - initScanWork)
		}
		gcw.heapScanWork = 0
	}
}

// gcDrainN blackens grey objects until it has performed roughly
// scanWork units of scan work or the G is preempted. This is
// best-effort, so it may perform less work if it fails to get a work
// buffer. Otherwise, it will perform at least n units of work, but
// may perform more because scanning is always done in whole object
// increments. It returns the amount of scan work performed.
//
// The caller goroutine must be in a preemptible state (e.g.,
// _Gwaiting) to prevent deadlocks during stack scanning. As a
// consequence, this must be called on the system stack.
//
//go:nowritebarrier
//go:systemstack
func gcDrainN(gcw *gcWork, scanWork int64) int64 {
	if !writeBarrier.enabled {
		throw("gcDrainN phase incorrect")
	}

// There may already be scan work on the gcw, which we don't
	// want to claim was done by this call.
	workFlushed := -gcw.heapScanWork

// In addition to backing out because of a preemption, back out
	// if the GC CPU limiter is enabled.
	gp := getg().m.curg
	for !gp.preempt && !gcCPULimiter.limiting() && workFlushed+gcw.heapScanWork < scanWork {
		// See gcDrain comment.
		if work.full == 0 {
			gcw.balance()
		}

b := gcw.tryGetFast()
		if b == 0 {
			b = gcw.tryGet()
			if b == 0 {
				// Flush the write barrier buffer;
				// this may create more work.
				wbBufFlush()
				b = gcw.tryGet()
			}
		}

if b == 0 {
			// Try to do a root job.
			if work.markrootNext < work.markrootJobs {
				job := atomic.Xadd(&work.markrootNext, +1) - 1
				if job < work.markrootJobs {
					workFlushed += markroot(gcw, job, false)
					continue
				}
			}
			// No heap or root jobs.
			break
		}

scanobject(b, gcw)

// Flush background scan work credit.
		if gcw.heapScanWork >= gcCreditSlack {
			gcController.heapScanWork.Add(gcw.heapScanWork)
			workFlushed += gcw.heapScanWork
			gcw.heapScanWork = 0
		}
	}

// Unlike gcDrain, there's no need to flush remaining work
	// here because this never flushes to bgScanCredit and
	// gcw.dispose will flush any remaining work to scanWork.

return workFlushed + gcw.heapScanWork
}

// scanblock scans b as scanobject would, but using an explicit
// pointer bitmap instead of the heap bitmap.
//
// This is used to scan non-heap roots, so it does not update
// gcw.bytesMarked or gcw.heapScanWork.
//
// If stk != nil, possible stack pointers are also reported to stk.putPtr.
//
//go:nowritebarrier
func scanblock(b0, n0 uintptr, ptrmask *uint8, gcw *gcWork, stk *stackScanState) {
	// Use local copies of original parameters, so that a stack trace
	// due to one of the throws below shows the original block
	// base and extent.
	b := b0
	n := n0

for i := uintptr(0); i < n; {
		// Find bits for the next word.
		bits := uint32(*addb(ptrmask, i/(goarch.PtrSize*8)))
		if bits == 0 {
			i += goarch.PtrSize * 8
			continue
		}
		for j := 0; j < 8 && i < n; j++ {
			if bits&1 != 0 {
				// Same work as in scanobject; see comments there.
				p := *(*uintptr)(unsafe.Pointer(b + i))
				if p != 0 {
					if obj, span, objIndex := findObject(p, b, i); obj != 0 {
						greyobject(obj, b, i, span, gcw, objIndex)
					} else if stk != nil && p >= stk.stack.lo && p < stk.stack.hi {
						stk.putPtr(p, false)
					}
				}
			}
			bits >>= 1
			i += goarch.PtrSize
		}
	}
}

// scanobject scans the object starting at b, adding pointers to gcw.
// b must point to the beginning of a heap object or an oblet.
// scanobject consults the GC bitmap for the pointer mask and the
// spans for the size of the object.
//
//go:nowritebarrier
func scanobject(b uintptr, gcw *gcWork) {
	// Prefetch object before we scan it.
	//
	// This will overlap fetching the beginning of the object with initial
	// setup before we start scanning the object.
	sys.Prefetch(b)

// Find the bits for b and the size of the object at b.
	//
	// b is either the beginning of an object, in which case this
	// is the size of the object to scan, or it points to an
	// oblet, in which case we compute the size to scan below.
	s := spanOfUnchecked(b)
	n := s.elemsize
	if n == 0 {
		throw("scanobject n == 0")
	}
	if s.spanclass.noscan() {
		// Correctness-wise this is ok, but it's inefficient
		// if noscan objects reach here.
		throw("scanobject of a noscan object")
	}

var tp typePointers
	if n > maxObletBytes {
		// Large object. Break into oblets for better
		// parallelism and lower latency.
		if b == s.base() {
			// Enqueue the other oblets to scan later.
			// Some oblets may be in b's scalar tail, but
			// these will be marked as "no more pointers",
			// so we'll drop out immediately when we go to
			// scan those.
			for oblet := b + maxObletBytes; oblet < s.base()+s.elemsize; oblet += maxObletBytes {
				if !gcw.putFast(oblet) {
					gcw.put(oblet)
				}
			}
		}

// Compute the size of the oblet. Since this object
		// must be a large object, s.base() is the beginning
		// of the object.
		n = s.base() + s.elemsize - b
		n = min(n, maxObletBytes)
		if goexperiment.AllocHeaders {
			tp = s.typePointersOfUnchecked(s.base())
			tp = tp.fastForward(b-tp.addr, b+n)
		}
	} else {
		if goexperiment.AllocHeaders {
			tp = s.typePointersOfUnchecked(b)
		}
	}

var hbits heapBits
	if !goexperiment.AllocHeaders {
		hbits = heapBitsForAddr(b, n)
	}
	var scanSize uintptr
	for {
		var addr uintptr
		if goexperiment.AllocHeaders {
			if tp, addr = tp.nextFast(); addr == 0 {
				if tp, addr = tp.next(b + n); addr == 0 {
					break
				}
			}
		} else {
			if hbits, addr = hbits.nextFast(); addr == 0 {
				if hbits, addr = hbits.next(); addr == 0 {
					break
				}
			}
		}

// Keep track of farthest pointer we found, so we can
		// update heapScanWork. TODO: is there a better metric,
		// now that we can skip scalar portions pretty efficiently?
		scanSize = addr - b + goarch.PtrSize

// Work here is duplicated in scanblock and above.
		// If you make changes here, make changes there too.
		obj := *(*uintptr)(unsafe.Pointer(addr))

// At this point we have extracted the next potential pointer.
		// Quickly filter out nil and pointers back to the current object.
		if obj != 0 && obj-b >= n {
			// Test if obj points into the Go heap and, if so,
			// mark the object.
			//
			// Note that it's possible for findObject to
			// fail if obj points to a just-allocated heap
			// object because of a race with growing the
			// heap. In this case, we know the object was
			// just allocated and hence will be marked by
			// allocation itself.
			if obj, span, objIndex := findObject(obj, b, addr-b); obj != 0 {
				greyobject(obj, b, addr-b, span, gcw, objIndex)
			}
		}
	}
	gcw.bytesMarked += uint64(n)
	gcw.heapScanWork += int64(scanSize)
}

// scanConservative scans block [b, b+n) conservatively, treating any
// pointer-like value in the block as a pointer.
//
// If ptrmask != nil, only words that are marked in ptrmask are
// considered as potential pointers.
//
// If state != nil, it's assumed that [b, b+n) is a block in the stack
// and may contain pointers to stack objects.
func scanConservative(b, n uintptr, ptrmask *uint8, gcw *gcWork, state *stackScanState) {
	if debugScanConservative {
		printlock()
		print("conservatively scanning [", hex(b), ",", hex(b+n), ")\n")
		hexdumpWords(b, b+n, func(p uintptr) byte {
			if ptrmask != nil {
				word := (p - b) / goarch.PtrSize
				bits := *addb(ptrmask, word/8)
				if (bits>>(word%8))&1 == 0 {
					return '$'
				}
			}

val := *(*uintptr)(unsafe.Pointer(p))
			if state != nil && state.stack.lo <= val && val < state.stack.hi {
				return '@'
			}

span := spanOfHeap(val)
			if span == nil {
				return ' '
			}
			idx := span.objIndex(val)
			if span.isFree(idx) {
				return ' '
			}
			return '*'
		})
		printunlock()
	}

for i := uintptr(0); i < n; i += goarch.PtrSize {
		if ptrmask != nil {
			word := i / goarch.PtrSize
			bits := *addb(ptrmask, word/8)
			if bits == 0 {
				// Skip 8 words (the loop increment will do the 8th)
				//
				// This must be the first time we've
				// seen this word of ptrmask, so i
				// must be 8-word-aligned, but check
				// our reasoning just in case.
				if i%(goarch.PtrSize*8) != 0 {
					throw("misaligned mask")
				}
				i += goarch.PtrSize*8 - goarch.PtrSize
				continue
			}
			if (bits>>(word%8))&1 == 0 {
				continue
			}
		}

val := *(*uintptr)(unsafe.Pointer(b + i))

// Check if val points into the stack.
		if state != nil && state.stack.lo <= val && val < state.stack.hi {
			// val may point to a stack object. This
			// object may be dead from last cycle and
			// hence may contain pointers to unallocated
			// objects, but unlike heap objects we can't
			// tell if it's already dead. Hence, if all
			// pointers to this object are from
			// conservative scanning, we have to scan it
			// defensively, too.
			state.putPtr(val, true)
			continue
		}

// Check if val points to a heap span.
		span := spanOfHeap(val)
		if span == nil {
			continue
		}

// Check if val points to an allocated object.
		idx := span.objIndex(val)
		if span.isFree(idx) {
			continue
		}

// val points to an allocated object. Mark it.
		obj := span.base() + idx*span.elemsize
		greyobject(obj, b, i, span, gcw, idx)
	}
}

// Shade the object if it isn't already.
// The object is not nil and known to be in the heap.
// Preemption must be disabled.
//
//go:nowritebarrier
func shade(b uintptr) {
	if obj, span, objIndex := findObject(b, 0, 0); obj != 0 {
		gcw := &getg().m.p.ptr().gcw
		greyobject(obj, 0, 0, span, gcw, objIndex)
	}
}

// obj is the start of an object with mark mbits.
// If it isn't already marked, mark it and enqueue into gcw.
// base and off are for debugging only and could be removed.
//
// See also wbBufFlush1, which partially duplicates this logic.
//
//go:nowritebarrierrec
func greyobject(obj, base, off uintptr, span *mspan, gcw *gcWork, objIndex uintptr) {
	// obj should be start of allocation, and so must be at least pointer-aligned.
	if obj&(goarch.PtrSize-1) != 0 {
		throw("greyobject: obj not pointer-aligned")
	}
	mbits := span.markBitsForIndex(objIndex)

if useCheckmark {
		if setCheckmark(obj, base, off, mbits) {
			// Already marked.
			return
		}
	} else {
		if debug.gccheckmark > 0 && span.isFree(objIndex) {
			print("runtime: marking free object ", hex(obj), " found at *(", hex(base), "+", hex(off), ")\n")
			gcDumpObject("base", base, off)
			gcDumpObject("obj", obj, ^uintptr(0))
			getg().m.traceback = 2
			throw("marking free object")
		}

// If marked we have nothing to do.
		if mbits.isMarked() {
			return
		}
		mbits.setMarked()

// Mark span.
		arena, pageIdx, pageMask := pageIndexOf(span.base())
		if arena.pageMarks[pageIdx]&pageMask == 0 {
			atomic.Or8(&arena.pageMarks[pageIdx], pageMask)
		}

// If this is a noscan object, fast-track it to black
		// instead of greying it.
		if span.spanclass.noscan() {
			gcw.bytesMarked += uint64(span.elemsize)
			return
		}
	}

// We're adding obj to P's local workbuf, so it's likely
	// this object will be processed soon by the same P.
	// Even if the workbuf gets flushed, there will likely still be
	// some benefit on platforms with inclusive shared caches.
	sys.Prefetch(obj)
	// Queue the obj for scanning.
	if !gcw.putFast(obj) {
		gcw.put(obj)
	}
}

// gcDumpObject dumps the contents of obj for debugging and marks the
// field at byte offset off in obj.
func gcDumpObject(label string, obj, off uintptr) {
	s := spanOf(obj)
	print(label, "=", hex(obj))
	if s == nil {
		print(" s=nil\n")
		return
	}
	print(" s.base()=", hex(s.base()), " s.limit=", hex(s.limit), " s.spanclass=", s.spanclass, " s.elemsize=", s.elemsize, " s.state=")
	if state := s.state.get(); 0 <= state && int(state) < len(mSpanStateNames) {
		print(mSpanStateNames[state], "\n")
	} else {
		print("unknown(", state, ")\n")
	}

skipped := false
	size := s.elemsize
	if s.state.get() == mSpanManual && size == 0 {
		// We're printing something from a stack frame. We
		// don't know how big it is, so just show up to an
		// including off.
		size = off + goarch.PtrSize
	}
	for i := uintptr(0); i < size; i += goarch.PtrSize {
		// For big objects, just print the beginning (because
		// that usually hints at the object's type) and the
		// fields around off.
		if !(i < 128*goarch.PtrSize || off-16*goarch.PtrSize < i && i < off+16*goarch.PtrSize) {
			skipped = true
			continue
		}
		if skipped {
			print(" ...\n")
			skipped = false
		}
		print(" *(", label, "+", i, ") = ", hex(*(*uintptr)(unsafe.Pointer(obj + i))))
		if i == off {
			print(" <==")
		}
		print("\n")
	}
	if skipped {
		print(" ...\n")
	}
}

// gcmarknewobject marks a newly allocated object black. obj must
// not contain any non-nil pointers.
//
// This is nosplit so it can manipulate a gcWork without preemption.
//
//go:nowritebarrier
//go:nosplit
func gcmarknewobject(span *mspan, obj uintptr) {
	if useCheckmark { // The world should be stopped so this should not happen.
		throw("gcmarknewobject called while doing checkmark")
	}

// Mark object.
	objIndex := span.objIndex(obj)
	span.markBitsForIndex(objIndex).setMarked()

// Mark span.
	arena, pageIdx, pageMask := pageIndexOf(span.base())
	if arena.pageMarks[pageIdx]&pageMask == 0 {
		atomic.Or8(&arena.pageMarks[pageIdx], pageMask)
	}

gcw := &getg().m.p.ptr().gcw
	gcw.bytesMarked += uint64(span.elemsize)
}

// gcMarkTinyAllocs greys all active tiny alloc blocks.
//
// The world must be stopped.
func gcMarkTinyAllocs() {
	assertWorldStopped()

for _, p := range allp {
		c := p.mcache
		if c == nil || c.tiny == 0 {
			continue
		}
		_, span, objIndex := findObject(c.tiny, 0, 0)
		gcw := &p.gcw
		greyobject(c.tiny, 0, 0, span, gcw, objIndex)
	}
}

[ CANCEL ]

Name	Type	Actions
.. (Parent Directory)
📄 HACKING.md	FILE	[EDIT]
📄 Makefile	FILE	[EDIT]
📄 abi_test.go	FILE	[EDIT]
📄 alg.go	FILE	[EDIT]
📄 align_runtime_test.go	FILE	[EDIT]
📄 align_test.go	FILE	[EDIT]
📄 arena.go	FILE	[EDIT]
📄 arena_test.go	FILE	[EDIT]
📁 asan/	DIR
📄 asan.go	FILE	[EDIT]
📄 asan0.go	FILE	[EDIT]
📄 asan_amd64.s	FILE	[EDIT]
📄 asan_arm64.s	FILE	[EDIT]
📄 asan_loong64.s	FILE	[EDIT]
📄 asan_ppc64le.s	FILE	[EDIT]
📄 asan_riscv64.s	FILE	[EDIT]
📄 asm.s	FILE	[EDIT]
📄 asm_386.s	FILE	[EDIT]
📄 asm_amd64.h	FILE	[EDIT]
📄 asm_amd64.s	FILE	[EDIT]
📄 asm_arm.s	FILE	[EDIT]
📄 asm_arm64.s	FILE	[EDIT]
📄 asm_loong64.s	FILE	[EDIT]
📄 asm_mips64x.s	FILE	[EDIT]
📄 asm_mipsx.s	FILE	[EDIT]
📄 asm_ppc64x.h	FILE	[EDIT]
📄 asm_ppc64x.s	FILE	[EDIT]
📄 asm_riscv64.s	FILE	[EDIT]
📄 asm_s390x.s	FILE	[EDIT]
📄 asm_wasm.s	FILE	[EDIT]
📄 atomic_arm64.s	FILE	[EDIT]
📄 atomic_loong64.s	FILE	[EDIT]
📄 atomic_mips64x.s	FILE	[EDIT]
📄 atomic_mipsx.s	FILE	[EDIT]
📄 atomic_pointer.go	FILE	[EDIT]
📄 atomic_ppc64x.s	FILE	[EDIT]
📄 atomic_riscv64.s	FILE	[EDIT]
📄 auxv_none.go	FILE	[EDIT]
📄 callers_test.go	FILE	[EDIT]
📁 cgo/	DIR
📄 cgo.go	FILE	[EDIT]
📄 cgo_mmap.go	FILE	[EDIT]
📄 cgo_ppc64x.go	FILE	[EDIT]
📄 cgo_sigaction.go	FILE	[EDIT]
📄 cgocall.go	FILE	[EDIT]
📄 cgocallback.go	FILE	[EDIT]
📄 cgocheck.go	FILE	[EDIT]
📄 chan.go	FILE	[EDIT]
📄 chan_test.go	FILE	[EDIT]
📄 chanbarrier_test.go	FILE	[EDIT]
📄 checkptr.go	FILE	[EDIT]
📄 checkptr_test.go	FILE	[EDIT]
📄 closure_test.go	FILE	[EDIT]
📄 compiler.go	FILE	[EDIT]
📄 complex.go	FILE	[EDIT]
📄 complex_test.go	FILE	[EDIT]
📄 conv_wasm_test.go	FILE	[EDIT]
📄 coro.go	FILE	[EDIT]
📁 coverage/	DIR
📄 covercounter.go	FILE	[EDIT]
📄 covermeta.go	FILE	[EDIT]
📄 cpuflags.go	FILE	[EDIT]
📄 cpuflags_amd64.go	FILE	[EDIT]
📄 cpuflags_arm64.go	FILE	[EDIT]
📄 cpuprof.go	FILE	[EDIT]
📄 cputicks.go	FILE	[EDIT]
📄 crash_cgo_test.go	FILE	[EDIT]
📄 crash_test.go	FILE	[EDIT]
📄 crash_unix_test.go	FILE	[EDIT]
📄 create_file_nounix.go	FILE	[EDIT]
📄 create_file_unix.go	FILE	[EDIT]
📁 debug/	DIR
📄 debug.go	FILE	[EDIT]
📄 debug_test.go	FILE	[EDIT]
📄 debugcall.go	FILE	[EDIT]
📄 debuglog.go	FILE	[EDIT]
📄 debuglog_off.go	FILE	[EDIT]
📄 debuglog_on.go	FILE	[EDIT]
📄 debuglog_test.go	FILE	[EDIT]
📄 defer_test.go	FILE	[EDIT]
📄 defs1_linux.go	FILE	[EDIT]
📄 defs1_netbsd_386.go	FILE	[EDIT]
📄 defs1_netbsd_amd64.go	FILE	[EDIT]
📄 defs1_netbsd_arm.go	FILE	[EDIT]
📄 defs1_netbsd_arm64.go	FILE	[EDIT]
📄 defs1_solaris_amd64.go	FILE	[EDIT]
📄 defs2_linux.go	FILE	[EDIT]
📄 defs3_linux.go	FILE	[EDIT]
📄 defs_aix.go	FILE	[EDIT]
📄 defs_aix_ppc64.go	FILE	[EDIT]
📄 defs_arm_linux.go	FILE	[EDIT]
📄 defs_darwin.go	FILE	[EDIT]
📄 defs_darwin_amd64.go	FILE	[EDIT]
📄 defs_darwin_arm64.go	FILE	[EDIT]
📄 defs_dragonfly.go	FILE	[EDIT]
📄 defs_dragonfly_amd64.go	FILE	[EDIT]
📄 defs_freebsd.go	FILE	[EDIT]
📄 defs_freebsd_386.go	FILE	[EDIT]
📄 defs_freebsd_amd64.go	FILE	[EDIT]
📄 defs_freebsd_arm.go	FILE	[EDIT]
📄 defs_freebsd_arm64.go	FILE	[EDIT]
📄 defs_freebsd_riscv64.go	FILE	[EDIT]
📄 defs_illumos_amd64.go	FILE	[EDIT]
📄 defs_linux.go	FILE	[EDIT]
📄 defs_linux_386.go	FILE	[EDIT]
📄 defs_linux_amd64.go	FILE	[EDIT]
📄 defs_linux_arm.go	FILE	[EDIT]
📄 defs_linux_arm64.go	FILE	[EDIT]
📄 defs_linux_loong64.go	FILE	[EDIT]
📄 defs_linux_mips64x.go	FILE	[EDIT]
📄 defs_linux_mipsx.go	FILE	[EDIT]
📄 defs_linux_ppc64.go	FILE	[EDIT]
📄 defs_linux_ppc64le.go	FILE	[EDIT]
📄 defs_linux_riscv64.go	FILE	[EDIT]
📄 defs_linux_s390x.go	FILE	[EDIT]
📄 defs_netbsd.go	FILE	[EDIT]
📄 defs_netbsd_386.go	FILE	[EDIT]
📄 defs_netbsd_amd64.go	FILE	[EDIT]
📄 defs_netbsd_arm.go	FILE	[EDIT]
📄 defs_openbsd.go	FILE	[EDIT]
📄 defs_openbsd_386.go	FILE	[EDIT]
📄 defs_openbsd_amd64.go	FILE	[EDIT]
📄 defs_openbsd_arm.go	FILE	[EDIT]
📄 defs_openbsd_arm64.go	FILE	[EDIT]
📄 defs_openbsd_mips64.go	FILE	[EDIT]
📄 defs_openbsd_ppc64.go	FILE	[EDIT]
📄 defs_openbsd_riscv64.go	FILE	[EDIT]
📄 defs_plan9_386.go	FILE	[EDIT]
📄 defs_plan9_amd64.go	FILE	[EDIT]
📄 defs_plan9_arm.go	FILE	[EDIT]
📄 defs_solaris.go	FILE	[EDIT]
📄 defs_solaris_amd64.go	FILE	[EDIT]
📄 defs_windows.go	FILE	[EDIT]
📄 defs_windows_386.go	FILE	[EDIT]
📄 defs_windows_amd64.go	FILE	[EDIT]
📄 defs_windows_arm.go	FILE	[EDIT]
📄 defs_windows_arm64.go	FILE	[EDIT]
📄 duff_386.s	FILE	[EDIT]
📄 duff_amd64.s	FILE	[EDIT]
📄 duff_arm.s	FILE	[EDIT]
📄 duff_arm64.s	FILE	[EDIT]
📄 duff_loong64.s	FILE	[EDIT]
📄 duff_mips64x.s	FILE	[EDIT]
📄 duff_ppc64x.s	FILE	[EDIT]
📄 duff_riscv64.s	FILE	[EDIT]
📄 duff_s390x.s	FILE	[EDIT]
📄 ehooks_test.go	FILE	[EDIT]
📄 env_plan9.go	FILE	[EDIT]
📄 env_posix.go	FILE	[EDIT]
📄 env_test.go	FILE	[EDIT]
📄 error.go	FILE	[EDIT]
📄 example_test.go	FILE	[EDIT]
📄 exithook.go	FILE	[EDIT]
📄 export_aix_test.go	FILE	[EDIT]
📄 export_arm_test.go	FILE	[EDIT]
📄 export_darwin_test.go	FILE	[EDIT]
📄 export_debug_amd64_test.go	FILE	[EDIT]
📄 export_debug_arm64_test.go	FILE	[EDIT]
📄 export_debug_ppc64le_test.go	FILE	[EDIT]
📄 export_debug_test.go	FILE	[EDIT]
📄 export_debuglog_test.go	FILE	[EDIT]
📄 export_linux_test.go	FILE	[EDIT]
📄 export_mmap_test.go	FILE	[EDIT]
📄 export_pipe2_test.go	FILE	[EDIT]
📄 export_pipe_test.go	FILE	[EDIT]
📄 export_test.go	FILE	[EDIT]
📄 export_unix_test.go	FILE	[EDIT]
📄 export_windows_test.go	FILE	[EDIT]
📄 extern.go	FILE	[EDIT]
📄 fastlog2.go	FILE	[EDIT]
📄 fastlog2_test.go	FILE	[EDIT]
📄 fastlog2table.go	FILE	[EDIT]
📄 fds_nonunix.go	FILE	[EDIT]
📄 fds_test.go	FILE	[EDIT]
📄 fds_unix.go	FILE	[EDIT]
📄 float.go	FILE	[EDIT]
📄 float_test.go	FILE	[EDIT]
📄 funcdata.h	FILE	[EDIT]
📄 gc_test.go	FILE	[EDIT]
📄 gcinfo_test.go	FILE	[EDIT]
📄 go_tls.h	FILE	[EDIT]
📄 hash32.go	FILE	[EDIT]
📄 hash64.go	FILE	[EDIT]
📄 hash_test.go	FILE	[EDIT]
📄 heap_test.go	FILE	[EDIT]
📄 heapdump.go	FILE	[EDIT]
📄 histogram.go	FILE	[EDIT]
📄 histogram_test.go	FILE	[EDIT]
📄 iface.go	FILE	[EDIT]
📄 iface_test.go	FILE	[EDIT]
📄 import_test.go	FILE	[EDIT]
📄 importx_test.go	FILE	[EDIT]
📁 internal/	DIR
📄 lfstack.go	FILE	[EDIT]
📄 lfstack_test.go	FILE	[EDIT]
📄 libfuzzer.go	FILE	[EDIT]
📄 libfuzzer_amd64.s	FILE	[EDIT]
📄 libfuzzer_arm64.s	FILE	[EDIT]
📄 lock_futex.go	FILE	[EDIT]
📄 lock_js.go	FILE	[EDIT]
📄 lock_sema.go	FILE	[EDIT]
📄 lock_wasip1.go	FILE	[EDIT]
📄 lockrank.go	FILE	[EDIT]
📄 lockrank_off.go	FILE	[EDIT]
📄 lockrank_on.go	FILE	[EDIT]
📄 lockrank_test.go	FILE	[EDIT]
📄 malloc.go	FILE	[EDIT]
📄 malloc_test.go	FILE	[EDIT]
📄 map.go	FILE	[EDIT]
📄 map_benchmark_test.go	FILE	[EDIT]
📄 map_fast32.go	FILE	[EDIT]
📄 map_fast64.go	FILE	[EDIT]
📄 map_faststr.go	FILE	[EDIT]
📄 map_test.go	FILE	[EDIT]
📄 mbarrier.go	FILE	[EDIT]
📄 mbitmap.go	FILE	[EDIT]
📄 mbitmap_allocheaders.go	FILE	[EDIT]
📄 mbitmap_noallocheaders.go	FILE	[EDIT]
📄 mcache.go	FILE	[EDIT]
📄 mcentral.go	FILE	[EDIT]
📄 mcheckmark.go	FILE	[EDIT]
📄 mem.go	FILE	[EDIT]
📄 mem_aix.go	FILE	[EDIT]
📄 mem_bsd.go	FILE	[EDIT]
📄 mem_darwin.go	FILE	[EDIT]
📄 mem_js.go	FILE	[EDIT]
📄 mem_linux.go	FILE	[EDIT]
📄 mem_plan9.go	FILE	[EDIT]
📄 mem_sbrk.go	FILE	[EDIT]
📄 mem_wasip1.go	FILE	[EDIT]
📄 mem_wasm.go	FILE	[EDIT]
📄 mem_windows.go	FILE	[EDIT]
📄 memclr_386.s	FILE	[EDIT]
📄 memclr_amd64.s	FILE	[EDIT]
📄 memclr_arm.s	FILE	[EDIT]
📄 memclr_arm64.s	FILE	[EDIT]
📄 memclr_loong64.s	FILE	[EDIT]
📄 memclr_mips64x.s	FILE	[EDIT]
📄 memclr_mipsx.s	FILE	[EDIT]
📄 memclr_plan9_386.s	FILE	[EDIT]
📄 memclr_plan9_amd64.s	FILE	[EDIT]
📄 memclr_ppc64x.s	FILE	[EDIT]
📄 memclr_riscv64.s	FILE	[EDIT]
📄 memclr_s390x.s	FILE	[EDIT]
📄 memclr_wasm.s	FILE	[EDIT]
📄 memmove_386.s	FILE	[EDIT]
📄 memmove_amd64.s	FILE	[EDIT]
📄 memmove_arm.s	FILE	[EDIT]
📄 memmove_arm64.s	FILE	[EDIT]
📄 memmove_linux_amd64_test.go	FILE	[EDIT]
📄 memmove_loong64.s	FILE	[EDIT]
📄 memmove_mips64x.s	FILE	[EDIT]
📄 memmove_mipsx.s	FILE	[EDIT]
📄 memmove_plan9_386.s	FILE	[EDIT]
📄 memmove_plan9_amd64.s	FILE	[EDIT]
📄 memmove_ppc64x.s	FILE	[EDIT]
📄 memmove_riscv64.s	FILE	[EDIT]
📄 memmove_s390x.s	FILE	[EDIT]
📄 memmove_test.go	FILE	[EDIT]
📄 memmove_wasm.s	FILE	[EDIT]
📁 metrics/	DIR
📄 metrics.go	FILE	[EDIT]
📄 metrics_test.go	FILE	[EDIT]
📄 mfinal.go	FILE	[EDIT]
📄 mfinal_test.go	FILE	[EDIT]
📄 mfixalloc.go	FILE	[EDIT]
📄 mgc.go	FILE	[EDIT]
📄 mgclimit.go	FILE	[EDIT]
📄 mgclimit_test.go	FILE	[EDIT]
📄 mgcmark.go	FILE	[EDIT]
📄 mgcpacer.go	FILE	[EDIT]
📄 mgcpacer_test.go	FILE	[EDIT]
📄 mgcscavenge.go	FILE	[EDIT]
📄 mgcscavenge_test.go	FILE	[EDIT]
📄 mgcstack.go	FILE	[EDIT]
📄 mgcsweep.go	FILE	[EDIT]
📄 mgcwork.go	FILE	[EDIT]
📄 mheap.go	FILE	[EDIT]
📄 minmax.go	FILE	[EDIT]
📄 minmax_test.go	FILE	[EDIT]
📄 mkduff.go	FILE	[EDIT]
📄 mkfastlog2table.go	FILE	[EDIT]
📄 mklockrank.go	FILE	[EDIT]
📄 mkpreempt.go	FILE	[EDIT]
📄 mksizeclasses.go	FILE	[EDIT]
📄 mmap.go	FILE	[EDIT]
📄 mpagealloc.go	FILE	[EDIT]
📄 mpagealloc_32bit.go	FILE	[EDIT]
📄 mpagealloc_64bit.go	FILE	[EDIT]
📄 mpagealloc_test.go	FILE	[EDIT]
📄 mpagecache.go	FILE	[EDIT]
📄 mpagecache_test.go	FILE	[EDIT]
📄 mpallocbits.go	FILE	[EDIT]
📄 mpallocbits_test.go	FILE	[EDIT]
📄 mprof.go	FILE	[EDIT]
📄 mranges.go	FILE	[EDIT]
📄 mranges_test.go	FILE	[EDIT]
📁 msan/	DIR
📄 msan.go	FILE	[EDIT]
📄 msan0.go	FILE	[EDIT]
📄 msan_amd64.s	FILE	[EDIT]
📄 msan_arm64.s	FILE	[EDIT]
📄 msan_loong64.s	FILE	[EDIT]
📄 msize_allocheaders.go	FILE	[EDIT]
📄 msize_noallocheaders.go	FILE	[EDIT]
📄 mspanset.go	FILE	[EDIT]
📄 mstats.go	FILE	[EDIT]
📄 mwbbuf.go	FILE	[EDIT]
📄 nbpipe_pipe.go	FILE	[EDIT]
📄 nbpipe_pipe2.go	FILE	[EDIT]
📄 nbpipe_pipe_test.go	FILE	[EDIT]
📄 nbpipe_test.go	FILE	[EDIT]
📄 net_plan9.go	FILE	[EDIT]
📄 netpoll.go	FILE	[EDIT]
📄 netpoll_aix.go	FILE	[EDIT]
📄 netpoll_epoll.go	FILE	[EDIT]
📄 netpoll_fake.go	FILE	[EDIT]
📄 netpoll_kqueue.go	FILE	[EDIT]
📄 netpoll_os_test.go	FILE	[EDIT]
📄 netpoll_solaris.go	FILE	[EDIT]
📄 netpoll_stub.go	FILE	[EDIT]
📄 netpoll_wasip1.go	FILE	[EDIT]
📄 netpoll_windows.go	FILE	[EDIT]
📄 nonwindows_stub.go	FILE	[EDIT]
📄 norace_linux_test.go	FILE	[EDIT]
📄 norace_test.go	FILE	[EDIT]
📄 numcpu_freebsd_test.go	FILE	[EDIT]
📄 os2_aix.go	FILE	[EDIT]
📄 os2_freebsd.go	FILE	[EDIT]
📄 os2_openbsd.go	FILE	[EDIT]
📄 os2_plan9.go	FILE	[EDIT]
📄 os2_solaris.go	FILE	[EDIT]
📄 os3_plan9.go	FILE	[EDIT]
📄 os3_solaris.go	FILE	[EDIT]
📄 os_aix.go	FILE	[EDIT]
📄 os_android.go	FILE	[EDIT]
📄 os_darwin.go	FILE	[EDIT]
📄 os_darwin_arm64.go	FILE	[EDIT]
📄 os_dragonfly.go	FILE	[EDIT]
📄 os_freebsd.go	FILE	[EDIT]
📄 os_freebsd2.go	FILE	[EDIT]
📄 os_freebsd_amd64.go	FILE	[EDIT]
📄 os_freebsd_arm.go	FILE	[EDIT]
📄 os_freebsd_arm64.go	FILE	[EDIT]
📄 os_freebsd_noauxv.go	FILE	[EDIT]
📄 os_freebsd_riscv64.go	FILE	[EDIT]
📄 os_illumos.go	FILE	[EDIT]
📄 os_js.go	FILE	[EDIT]
📄 os_linux.go	FILE	[EDIT]
📄 os_linux_arm.go	FILE	[EDIT]
📄 os_linux_arm64.go	FILE	[EDIT]
📄 os_linux_be64.go	FILE	[EDIT]
📄 os_linux_generic.go	FILE	[EDIT]
📄 os_linux_loong64.go	FILE	[EDIT]
📄 os_linux_mips64x.go	FILE	[EDIT]
📄 os_linux_mipsx.go	FILE	[EDIT]
📄 os_linux_noauxv.go	FILE	[EDIT]
📄 os_linux_novdso.go	FILE	[EDIT]
📄 os_linux_ppc64x.go	FILE	[EDIT]
📄 os_linux_riscv64.go	FILE	[EDIT]
📄 os_linux_s390x.go	FILE	[EDIT]
📄 os_linux_x86.go	FILE	[EDIT]
📄 os_netbsd.go	FILE	[EDIT]
📄 os_netbsd_386.go	FILE	[EDIT]
📄 os_netbsd_amd64.go	FILE	[EDIT]
📄 os_netbsd_arm.go	FILE	[EDIT]
📄 os_netbsd_arm64.go	FILE	[EDIT]
📄 os_nonopenbsd.go	FILE	[EDIT]
📄 os_only_solaris.go	FILE	[EDIT]
📄 os_openbsd.go	FILE	[EDIT]
📄 os_openbsd_arm.go	FILE	[EDIT]
📄 os_openbsd_arm64.go	FILE	[EDIT]
📄 os_openbsd_libc.go	FILE	[EDIT]
📄 os_openbsd_mips64.go	FILE	[EDIT]
📄 os_openbsd_syscall.go	FILE	[EDIT]
📄 os_openbsd_syscall1.go	FILE	[EDIT]
📄 os_openbsd_syscall2.go	FILE	[EDIT]
📄 os_plan9.go	FILE	[EDIT]
📄 os_plan9_arm.go	FILE	[EDIT]
📄 os_solaris.go	FILE	[EDIT]
📄 os_unix.go	FILE	[EDIT]
📄 os_unix_nonlinux.go	FILE	[EDIT]
📄 os_wasip1.go	FILE	[EDIT]
📄 os_wasm.go	FILE	[EDIT]
📄 os_windows.go	FILE	[EDIT]
📄 os_windows_arm.go	FILE	[EDIT]
📄 os_windows_arm64.go	FILE	[EDIT]
📄 pagetrace_off.go	FILE	[EDIT]
📄 pagetrace_on.go	FILE	[EDIT]
📄 panic.go	FILE	[EDIT]
📄 panic32.go	FILE	[EDIT]
📄 panic_test.go	FILE	[EDIT]
📄 panicnil_test.go	FILE	[EDIT]
📄 pinner.go	FILE	[EDIT]
📄 pinner_test.go	FILE	[EDIT]
📄 plugin.go	FILE	[EDIT]
📁 pprof/	DIR
📄 preempt.go	FILE	[EDIT]
📄 preempt_386.s	FILE	[EDIT]
📄 preempt_amd64.s	FILE	[EDIT]
📄 preempt_arm.s	FILE	[EDIT]
📄 preempt_arm64.s	FILE	[EDIT]
📄 preempt_loong64.s	FILE	[EDIT]
📄 preempt_mips64x.s	FILE	[EDIT]
📄 preempt_mipsx.s	FILE	[EDIT]
📄 preempt_nonwindows.go	FILE	[EDIT]
📄 preempt_ppc64x.s	FILE	[EDIT]
📄 preempt_riscv64.s	FILE	[EDIT]
📄 preempt_s390x.s	FILE	[EDIT]
📄 preempt_wasm.s	FILE	[EDIT]
📄 print.go	FILE	[EDIT]
📄 proc.go	FILE	[EDIT]
📄 proc_runtime_test.go	FILE	[EDIT]
📄 proc_test.go	FILE	[EDIT]
📄 profbuf.go	FILE	[EDIT]
📄 profbuf_test.go	FILE	[EDIT]
📄 proflabel.go	FILE	[EDIT]
📁 race/	DIR
📄 race.go	FILE	[EDIT]
📄 race0.go	FILE	[EDIT]
📄 race_amd64.s	FILE	[EDIT]
📄 race_arm64.s	FILE	[EDIT]
📄 race_ppc64le.s	FILE	[EDIT]
📄 race_s390x.s	FILE	[EDIT]
📄 rand.go	FILE	[EDIT]
📄 rand_test.go	FILE	[EDIT]
📄 rdebug.go	FILE	[EDIT]
📄 retry.go	FILE	[EDIT]
📄 rt0_aix_ppc64.s	FILE	[EDIT]
📄 rt0_android_386.s	FILE	[EDIT]
📄 rt0_android_amd64.s	FILE	[EDIT]
📄 rt0_android_arm.s	FILE	[EDIT]
📄 rt0_android_arm64.s	FILE	[EDIT]
📄 rt0_darwin_amd64.s	FILE	[EDIT]
📄 rt0_darwin_arm64.s	FILE	[EDIT]
📄 rt0_dragonfly_amd64.s	FILE	[EDIT]
📄 rt0_freebsd_386.s	FILE	[EDIT]
📄 rt0_freebsd_amd64.s	FILE	[EDIT]
📄 rt0_freebsd_arm.s	FILE	[EDIT]
📄 rt0_freebsd_arm64.s	FILE	[EDIT]
📄 rt0_freebsd_riscv64.s	FILE	[EDIT]
📄 rt0_illumos_amd64.s	FILE	[EDIT]
📄 rt0_ios_amd64.s	FILE	[EDIT]
📄 rt0_ios_arm64.s	FILE	[EDIT]
📄 rt0_js_wasm.s	FILE	[EDIT]
📄 rt0_linux_386.s	FILE	[EDIT]
📄 rt0_linux_amd64.s	FILE	[EDIT]
📄 rt0_linux_arm.s	FILE	[EDIT]
📄 rt0_linux_arm64.s	FILE	[EDIT]
📄 rt0_linux_loong64.s	FILE	[EDIT]
📄 rt0_linux_mips64x.s	FILE	[EDIT]
📄 rt0_linux_mipsx.s	FILE	[EDIT]
📄 rt0_linux_ppc64.s	FILE	[EDIT]
📄 rt0_linux_ppc64le.s	FILE	[EDIT]
📄 rt0_linux_riscv64.s	FILE	[EDIT]
📄 rt0_linux_s390x.s	FILE	[EDIT]
📄 rt0_netbsd_386.s	FILE	[EDIT]
📄 rt0_netbsd_amd64.s	FILE	[EDIT]
📄 rt0_netbsd_arm.s	FILE	[EDIT]
📄 rt0_netbsd_arm64.s	FILE	[EDIT]
📄 rt0_openbsd_386.s	FILE	[EDIT]
📄 rt0_openbsd_amd64.s	FILE	[EDIT]
📄 rt0_openbsd_arm.s	FILE	[EDIT]
📄 rt0_openbsd_arm64.s	FILE	[EDIT]
📄 rt0_openbsd_mips64.s	FILE	[EDIT]
📄 rt0_openbsd_ppc64.s	FILE	[EDIT]
📄 rt0_openbsd_riscv64.s	FILE	[EDIT]
📄 rt0_plan9_386.s	FILE	[EDIT]
📄 rt0_plan9_amd64.s	FILE	[EDIT]
📄 rt0_plan9_arm.s	FILE	[EDIT]
📄 rt0_solaris_amd64.s	FILE	[EDIT]
📄 rt0_wasip1_wasm.s	FILE	[EDIT]
📄 rt0_windows_386.s	FILE	[EDIT]
📄 rt0_windows_amd64.s	FILE	[EDIT]
📄 rt0_windows_arm.s	FILE	[EDIT]
📄 rt0_windows_arm64.s	FILE	[EDIT]
📄 runtime-gdb.py	FILE	[EDIT]
📄 runtime-gdb_test.go	FILE	[EDIT]
📄 runtime-gdb_unix_test.go	FILE	[EDIT]
📄 runtime-lldb_test.go	FILE	[EDIT]
📄 runtime-seh_windows_test.go	FILE	[EDIT]
📄 runtime.go	FILE	[EDIT]
📄 runtime1.go	FILE	[EDIT]
📄 runtime2.go	FILE	[EDIT]
📄 runtime_boring.go	FILE	[EDIT]
📄 runtime_linux_test.go	FILE	[EDIT]
📄 runtime_mmap_test.go	FILE	[EDIT]
📄 runtime_test.go	FILE	[EDIT]
📄 runtime_unix_test.go	FILE	[EDIT]
📄 rwmutex.go	FILE	[EDIT]
📄 rwmutex_test.go	FILE	[EDIT]
📄 security_aix.go	FILE	[EDIT]
📄 security_issetugid.go	FILE	[EDIT]
📄 security_linux.go	FILE	[EDIT]
📄 security_nonunix.go	FILE	[EDIT]
📄 security_test.go	FILE	[EDIT]
📄 security_unix.go	FILE	[EDIT]
📄 select.go	FILE	[EDIT]
📄 sema.go	FILE	[EDIT]
📄 sema_test.go	FILE	[EDIT]
📄 semasleep_test.go	FILE	[EDIT]
📄 sigaction.go	FILE	[EDIT]
📄 signal_386.go	FILE	[EDIT]
📄 signal_aix_ppc64.go	FILE	[EDIT]
📄 signal_amd64.go	FILE	[EDIT]
📄 signal_arm.go	FILE	[EDIT]
📄 signal_arm64.go	FILE	[EDIT]
📄 signal_darwin.go	FILE	[EDIT]
📄 signal_darwin_amd64.go	FILE	[EDIT]
📄 signal_darwin_arm64.go	FILE	[EDIT]
📄 signal_dragonfly.go	FILE	[EDIT]
📄 signal_dragonfly_amd64.go	FILE	[EDIT]
📄 signal_freebsd.go	FILE	[EDIT]
📄 signal_freebsd_386.go	FILE	[EDIT]
📄 signal_freebsd_amd64.go	FILE	[EDIT]
📄 signal_freebsd_arm.go	FILE	[EDIT]
📄 signal_freebsd_arm64.go	FILE	[EDIT]
📄 signal_freebsd_riscv64.go	FILE	[EDIT]
📄 signal_linux_386.go	FILE	[EDIT]
📄 signal_linux_amd64.go	FILE	[EDIT]
📄 signal_linux_arm.go	FILE	[EDIT]
📄 signal_linux_arm64.go	FILE	[EDIT]
📄 signal_linux_loong64.go	FILE	[EDIT]
📄 signal_linux_mips64x.go	FILE	[EDIT]
📄 signal_linux_mipsx.go	FILE	[EDIT]
📄 signal_linux_ppc64x.go	FILE	[EDIT]
📄 signal_linux_riscv64.go	FILE	[EDIT]
📄 signal_linux_s390x.go	FILE	[EDIT]
📄 signal_loong64.go	FILE	[EDIT]
📄 signal_mips64x.go	FILE	[EDIT]
📄 signal_mipsx.go	FILE	[EDIT]
📄 signal_netbsd.go	FILE	[EDIT]
📄 signal_netbsd_386.go	FILE	[EDIT]
📄 signal_netbsd_amd64.go	FILE	[EDIT]
📄 signal_netbsd_arm.go	FILE	[EDIT]
📄 signal_netbsd_arm64.go	FILE	[EDIT]
📄 signal_openbsd.go	FILE	[EDIT]
📄 signal_openbsd_386.go	FILE	[EDIT]
📄 signal_openbsd_amd64.go	FILE	[EDIT]
📄 signal_openbsd_arm.go	FILE	[EDIT]
📄 signal_openbsd_arm64.go	FILE	[EDIT]
📄 signal_openbsd_mips64.go	FILE	[EDIT]
📄 signal_openbsd_ppc64.go	FILE	[EDIT]
📄 signal_openbsd_riscv64.go	FILE	[EDIT]
📄 signal_plan9.go	FILE	[EDIT]
📄 signal_ppc64x.go	FILE	[EDIT]
📄 signal_riscv64.go	FILE	[EDIT]
📄 signal_solaris.go	FILE	[EDIT]
📄 signal_solaris_amd64.go	FILE	[EDIT]
📄 signal_unix.go	FILE	[EDIT]
📄 signal_windows.go	FILE	[EDIT]
📄 signal_windows_test.go	FILE	[EDIT]
📄 sigqueue.go	FILE	[EDIT]
📄 sigqueue_note.go	FILE	[EDIT]
📄 sigqueue_plan9.go	FILE	[EDIT]
📄 sigtab_aix.go	FILE	[EDIT]
📄 sigtab_linux_generic.go	FILE	[EDIT]
📄 sigtab_linux_mipsx.go	FILE	[EDIT]
📄 sizeclasses.go	FILE	[EDIT]
📄 sizeof_test.go	FILE	[EDIT]
📄 slice.go	FILE	[EDIT]
📄 slice_test.go	FILE	[EDIT]
📄 softfloat64.go	FILE	[EDIT]
📄 softfloat64_test.go	FILE	[EDIT]
📄 stack.go	FILE	[EDIT]
📄 stack_test.go	FILE	[EDIT]
📄 start_line_amd64_test.go	FILE	[EDIT]
📄 start_line_test.go	FILE	[EDIT]
📄 stkframe.go	FILE	[EDIT]
📄 string.go	FILE	[EDIT]
📄 string_test.go	FILE	[EDIT]
📄 stubs.go	FILE	[EDIT]
📄 stubs2.go	FILE	[EDIT]
📄 stubs3.go	FILE	[EDIT]
📄 stubs_386.go	FILE	[EDIT]
📄 stubs_amd64.go	FILE	[EDIT]
📄 stubs_arm.go	FILE	[EDIT]
📄 stubs_arm64.go	FILE	[EDIT]
📄 stubs_linux.go	FILE	[EDIT]
📄 stubs_loong64.go	FILE	[EDIT]
📄 stubs_mips64x.go	FILE	[EDIT]
📄 stubs_mipsx.go	FILE	[EDIT]
📄 stubs_nonlinux.go	FILE	[EDIT]
📄 stubs_ppc64.go	FILE	[EDIT]
📄 stubs_ppc64x.go	FILE	[EDIT]
📄 stubs_riscv64.go	FILE	[EDIT]
📄 stubs_s390x.go	FILE	[EDIT]
📄 symtab.go	FILE	[EDIT]
📄 symtab_test.go	FILE	[EDIT]
📄 symtabinl.go	FILE	[EDIT]
📄 symtabinl_test.go	FILE	[EDIT]
📄 sys_aix_ppc64.s	FILE	[EDIT]
📄 sys_arm.go	FILE	[EDIT]
📄 sys_arm64.go	FILE	[EDIT]
📄 sys_darwin.go	FILE	[EDIT]
📄 sys_darwin_amd64.s	FILE	[EDIT]
📄 sys_darwin_arm64.go	FILE	[EDIT]
📄 sys_darwin_arm64.s	FILE	[EDIT]
📄 sys_dragonfly_amd64.s	FILE	[EDIT]
📄 sys_freebsd_386.s	FILE	[EDIT]
📄 sys_freebsd_amd64.s	FILE	[EDIT]
📄 sys_freebsd_arm.s	FILE	[EDIT]
📄 sys_freebsd_arm64.s	FILE	[EDIT]
📄 sys_freebsd_riscv64.s	FILE	[EDIT]
📄 sys_libc.go	FILE	[EDIT]
📄 sys_linux_386.s	FILE	[EDIT]
📄 sys_linux_amd64.s	FILE	[EDIT]
📄 sys_linux_arm.s	FILE	[EDIT]
📄 sys_linux_arm64.s	FILE	[EDIT]
📄 sys_linux_loong64.s	FILE	[EDIT]
📄 sys_linux_mips64x.s	FILE	[EDIT]
📄 sys_linux_mipsx.s	FILE	[EDIT]
📄 sys_linux_ppc64x.s	FILE	[EDIT]
📄 sys_linux_riscv64.s	FILE	[EDIT]
📄 sys_linux_s390x.s	FILE	[EDIT]
📄 sys_loong64.go	FILE	[EDIT]
📄 sys_mips64x.go	FILE	[EDIT]
📄 sys_mipsx.go	FILE	[EDIT]
📄 sys_netbsd_386.s	FILE	[EDIT]
📄 sys_netbsd_amd64.s	FILE	[EDIT]
📄 sys_netbsd_arm.s	FILE	[EDIT]
📄 sys_netbsd_arm64.s	FILE	[EDIT]
📄 sys_nonppc64x.go	FILE	[EDIT]
📄 sys_openbsd.go	FILE	[EDIT]
📄 sys_openbsd1.go	FILE	[EDIT]
📄 sys_openbsd2.go	FILE	[EDIT]
📄 sys_openbsd3.go	FILE	[EDIT]
📄 sys_openbsd_386.s	FILE	[EDIT]
📄 sys_openbsd_amd64.s	FILE	[EDIT]
📄 sys_openbsd_arm.s	FILE	[EDIT]
📄 sys_openbsd_arm64.s	FILE	[EDIT]
📄 sys_openbsd_mips64.s	FILE	[EDIT]
📄 sys_openbsd_ppc64.s	FILE	[EDIT]
📄 sys_openbsd_riscv64.s	FILE	[EDIT]
📄 sys_plan9_386.s	FILE	[EDIT]
📄 sys_plan9_amd64.s	FILE	[EDIT]
📄 sys_plan9_arm.s	FILE	[EDIT]
📄 sys_ppc64x.go	FILE	[EDIT]
📄 sys_riscv64.go	FILE	[EDIT]
📄 sys_s390x.go	FILE	[EDIT]
📄 sys_solaris_amd64.s	FILE	[EDIT]
📄 sys_wasm.go	FILE	[EDIT]
📄 sys_wasm.s	FILE	[EDIT]
📄 sys_windows_386.s	FILE	[EDIT]
📄 sys_windows_amd64.s	FILE	[EDIT]
📄 sys_windows_arm.s	FILE	[EDIT]
📄 sys_windows_arm64.s	FILE	[EDIT]
📄 sys_x86.go	FILE	[EDIT]
📄 syscall2_solaris.go	FILE	[EDIT]
📄 syscall_aix.go	FILE	[EDIT]
📄 syscall_solaris.go	FILE	[EDIT]
📄 syscall_unix_test.go	FILE	[EDIT]
📄 syscall_windows.go	FILE	[EDIT]
📄 syscall_windows_test.go	FILE	[EDIT]
📄 tagptr.go	FILE	[EDIT]
📄 tagptr_32bit.go	FILE	[EDIT]
📄 tagptr_64bit.go	FILE	[EDIT]
📄 test_amd64.go	FILE	[EDIT]
📄 test_amd64.s	FILE	[EDIT]
📄 test_stubs.go	FILE	[EDIT]
📁 testdata/	DIR
📄 textflag.h	FILE	[EDIT]
📄 time.go	FILE	[EDIT]
📄 time_fake.go	FILE	[EDIT]
📄 time_linux_amd64.s	FILE	[EDIT]
📄 time_nofake.go	FILE	[EDIT]
📄 time_test.go	FILE	[EDIT]
📄 time_windows.h	FILE	[EDIT]
📄 time_windows_386.s	FILE	[EDIT]
📄 time_windows_amd64.s	FILE	[EDIT]
📄 time_windows_arm.s	FILE	[EDIT]
📄 time_windows_arm64.s	FILE	[EDIT]
📄 timeasm.go	FILE	[EDIT]
📄 timestub.go	FILE	[EDIT]
📄 timestub2.go	FILE	[EDIT]
📄 tls_arm.s	FILE	[EDIT]
📄 tls_arm64.h	FILE	[EDIT]
📄 tls_arm64.s	FILE	[EDIT]
📄 tls_loong64.s	FILE	[EDIT]
📄 tls_mips64x.s	FILE	[EDIT]
📄 tls_mipsx.s	FILE	[EDIT]
📄 tls_ppc64x.s	FILE	[EDIT]
📄 tls_riscv64.s	FILE	[EDIT]
📄 tls_s390x.s	FILE	[EDIT]
📄 tls_stub.go	FILE	[EDIT]
📄 tls_windows_amd64.go	FILE	[EDIT]
📁 trace/	DIR
📄 trace.go	FILE	[EDIT]
📄 trace2.go	FILE	[EDIT]
📄 trace2buf.go	FILE	[EDIT]
📄 trace2cpu.go	FILE	[EDIT]
📄 trace2event.go	FILE	[EDIT]
📄 trace2map.go	FILE	[EDIT]
📄 trace2region.go	FILE	[EDIT]
📄 trace2runtime.go	FILE	[EDIT]
📄 trace2stack.go	FILE	[EDIT]
📄 trace2status.go	FILE	[EDIT]
📄 trace2string.go	FILE	[EDIT]
📄 trace2time.go	FILE	[EDIT]
📄 trace_cgo_test.go	FILE	[EDIT]
📄 traceback.go	FILE	[EDIT]
📄 traceback_test.go	FILE	[EDIT]
📄 tracebackx_test.go	FILE	[EDIT]
📄 type.go	FILE	[EDIT]
📄 typekind.go	FILE	[EDIT]
📄 unsafe.go	FILE	[EDIT]
📄 unsafepoint_test.go	FILE	[EDIT]
📄 utf8.go	FILE	[EDIT]
📄 vdso_elf32.go	FILE	[EDIT]
📄 vdso_elf64.go	FILE	[EDIT]
📄 vdso_freebsd.go	FILE	[EDIT]
📄 vdso_freebsd_arm.go	FILE	[EDIT]
📄 vdso_freebsd_arm64.go	FILE	[EDIT]
📄 vdso_freebsd_riscv64.go	FILE	[EDIT]
📄 vdso_freebsd_x86.go	FILE	[EDIT]
📄 vdso_in_none.go	FILE	[EDIT]
📄 vdso_linux.go	FILE	[EDIT]
📄 vdso_linux_386.go	FILE	[EDIT]
📄 vdso_linux_amd64.go	FILE	[EDIT]
📄 vdso_linux_arm.go	FILE	[EDIT]
📄 vdso_linux_arm64.go	FILE	[EDIT]
📄 vdso_linux_loong64.go	FILE	[EDIT]
📄 vdso_linux_mips64x.go	FILE	[EDIT]
📄 vdso_linux_ppc64x.go	FILE	[EDIT]
📄 vdso_linux_riscv64.go	FILE	[EDIT]
📄 vdso_linux_s390x.go	FILE	[EDIT]
📄 vdso_test.go	FILE	[EDIT]
📄 vlop_386.s	FILE	[EDIT]
📄 vlop_arm.s	FILE	[EDIT]
📄 vlop_arm_test.go	FILE	[EDIT]
📄 vlrt.go	FILE	[EDIT]
📄 wincallback.go	FILE	[EDIT]
📄 write_err.go	FILE	[EDIT]
📄 write_err_android.go	FILE	[EDIT]
📄 zcallback_windows.go	FILE	[EDIT]
📄 zcallback_windows.s	FILE	[EDIT]
📄 zcallback_windows_arm.s	FILE	[EDIT]
📄 zcallback_windows_arm64.s	FILE	[EDIT]